Cudy Router Setup Guide: How to install Cudy Router?

There’s a whole list of routers and networking devices flooding the market. From basic networking features to advanced router functions, there are different models available that serve different purposes as per user requirements. And, Cudy routers are one among the exhaustive list- offering features that impress a lot of netizens. However, if you are looking to make the most out of them, completing the Cudy router setup process becomes essential.

Once complete, the Cudy AC1200 router setup process will allow you to access your device and customise the functions to your requirement. This page will serve as a one-stop Cudy 4G LTE router manual that will walk you through the key steps in the setup process.

How to set up Cudy router?

Turn off your modem and remove the batteries if any.
Connect the Internet port on your router to the DSL MODEM using an ethernet cable.
Turn on your MODEM and wait for about 2 minutes for it to restart.
Connect the power adapter of the router and wait for about a minute till the router boots up. Once the LED of the device changes to solid red/blue, the device is ready for network setup.
Connect your computer to the router. You can do that using a wired or a wireless connection.
For a wired connection, connect your computer to the router’s LAN port using an ethernet cable. If you prefer a wireless connection, connect the device to the router’s WIFI network using the WiFi name and SSID printed on the product label at the bottom of the router.

Now, launch a web browser on your connected device and type http://cudy.net in the web address bar. You can also use the IP address http://192.168.10.1 instead to access the Cudy router login page.
Sign in using the admin password details. You will find the same mentioned on the product label at the bottom of the router.
Once logged in, you will see the Quick Setup popup. This is where you can begin with the Cudy router setup process.
You can now follow the step by step process to set up the internet connection. Once connected, you can check the status of your internet connection using the LED status.

For a video illustration of the Cudy WiFi router setup process, you can check the video here.

Cudy Router Firmware Update

Once you have completed the Cudy setup process, you can download the latest firmware from the official website www.cudy.com/download.
Once you download the file, unzip the file and save the firmware file on your local storage.
Power on your Cudy router and allow it to boot up.
Connect to its network using a wired or a wireless network.
Once connected, head to the web browser and go to http://cudy.net or http://192.168.10.1.
On the login screen, use the default admin credentials to sign in.
Go to Advanced Settings and then select the Firmware option.
Choose the firmware file from the local storage to upload the file.
Allow some 5 minutes for the Cudy router setup to complete the firmware update process.

Cudy Router VPN Setup

VPN or Virtual Private Network helps users access the internet remotely while hiding the identity. This happens using tunnelling technology. When you have enabled the Cudy router VPN setup, your personal information including the IP address is hidden. To complete the VPN setup on your Cudy router setup, here are some steps you can follow:

Login to your Cudy router using the default credentials.
Go to the General Settings and select the VPN option. Click on the toggle button at the top to enable the VPN.
You can now set rules to see which devices are allowed or restricted to use VPN.
To do so, click on System Status and then hit Devices. Now, click on the VPN option to enable or disable the same.
From the protocol list, select the respective VPN type(PPTP, L2TP, Open VPN, Wireguard VPN) that you need enabled and type in the related VPN information as provided by your VPN provider.
The information related to Interface and Peer will get synchronised easily using your VPN provider’s CONF file.
Finally, type in the Zero Tier Slave information such as the ZeroTier Network ID and the Gateway address. You can find the Gateway on the VPN Status part.
Finally, click on the Save and Apply button.

Frequently Asked Questions

How do I access my Cudy router?

Connect your computer or mobile device to the Cudy router using an Ethernet cable or through a Wi-Fi connection.
Open a web browser on your device.
In the address bar, type the default IP address of the Cudy router, which is typically 192.168.10.1, and press Enter.
You will be directed to the Cudy router login page of the router’s web interface.
Enter the default username and Cudy router setup password. The default username is often “admin,” and the default password is usually “admin” or “password.” If these credentials don’t work, consult the user manual or the label on the router for the correct login information.
After successfully logging in, you will have access to the Cudy router setup interface.

How do I setup my 4G router?

To set up your Cudy 4G router, follow these additional steps:

Connect the power adapter to the router and plug it into a power source.
Wait for the router to boot up and establish a connection to the mobile network.
Connect your computer or mobile device to the Cudy router’s Wi-Fi network or use an Ethernet cable to establish a wired connection.
Open a web browser and enter the Cudy router’s IP address (e.g., 192.168.10.1) into the address bar.
Log in to the router’s web interface using the username and password.
Follow the on-screen instructions or consult the user manual to configure the settings specific to your mobile network provider.
Save the settings and wait for the router to apply the changes. The router should now be set up and ready to provide internet connectivity.

How do I connect my Cudy ac1200?

To connect your device to the Cudy AC1200 router setup, follow these steps:

Power on the Cudy AC1200 router by connecting it to a power source.
Wait for the router to boot up and establish a stable connection.
On your computer or mobile device, go to the Wi-Fi settings and search for available Wi-Fi networks.
Locate and select the Wi-Fi network name (SSID) of the Cudy AC1200 router setup from the list.
If prompted, enter the Cudy router setup password. The default Wi-Fi password can be found on the router’s label or in the user manual.
Once you enter the password correctly, your device will connect to the Cudy AC1200 router’s Wi-Fi network.

How do I reset my Cudy router setup to factory default settings?

To reset your Cudy router setup, here are some steps you can follow:

Turn on your router.
Press and hold the RST/WPS button for about 5-6 seconds.
Once the power LED on the front panel flashes, release the button and allow some time for the router to restart.